100W USB Type-C® Power Bank Reference Design
This is a USB-certified single port power bank reference design. It can connect 2 to 4 cells (default is 3 cells) in series and has a battery monitor function on this...
Overview
Description
The R9A02G011 is a USB Power Delivery Controller that is based on the Universal Serial Bus (USB) Power Delivery Specification Revision 3.1 and USB Type-C® Cable and Connecter Specification Revision 2.1. The R9A02G011 performs negotiation for more current and/or higher voltages over the USB cable (VBUS) than are defined in the USB2.0, USB3.0 or BC1.2 specifications, and controls circuitry to select local power source or power sink. The R9A02G011 uses a 300kbps BMC modulated signal through the CC wire in the USB Type-C® cable. It comes in two types of package, 32-pin QFN for easy implementation, and 42-pin BGA for reducing space, so that it can choose according to the application and PCB space. In addition, the R9A02G011 incorporates Renesas' low-power technologies.
Features
- Compliant with USB Power Delivery Specification Revision 3.1 and USB Type-C® Cable and Connector Specification Revision 2.1.
- Certified by USB Implementers Forum: TID= 64651080009 (Silicon), 1020074 (E-marker)
- Supports Standard Power Range including Programmable Power Supply
* Not cover Extended Power Range including Adjustable Voltage Supply - Supports IEC63002
- Supports up to 260 bytes data transfer
- Supports Dual Role operation and Role Swap protocol
- Supports Dead Battery operation
- Supports alternate mode and electronically marked cables
- Supports all USB Type-C® Connection State Diagrams for USB Type-C® port control
- Single Power Supply with wide voltage range
- 3.0V to 5.5V (R9A02G011GNP)
- 2.7V to 5.5V (R9A02G011GBG)
- Integrated CC-PHY and CC-logic
- On-chip Flash ROM
- On-chip Oscillator
- On-chip Power-On-Reset (POR) circuit
- Supports SMBus Master and Slave interfaces
- Suitable for Energy Star and EuP specifications for low-power PC peripheral systems
- Selectable two types of package according to the application and board space
- 32pin QFN (5mm x 5mm)
- 42pin BGA (3.6mm x 3.1mm)
Comparison
Applications
Applications
- USB outlet, Portable Charger/Power Bank
- AC Adapter, USB PD Hub, PC
- Mobile Device (Smartphone, Tablet), Docking Station
- PC Peripheral Device (Monitor, Printer, Router, External HDD)
- Home Electronics (DTV, STB, Home Gateway)
- POS, Measuring instrument
- USB Type-C® Cablet, etc.
Design & Development
Boards & Kits
Boards & Kits
100W USB Type-C® DC Input Module
This is a USB-certified reference design for dual-port sourcing ports. This reference design converts a DC input to two USB Type-C® source ports. USB Type-C® source...
Featured Documents:
100W USB Type-C® Input/Output Power Converter
This is the single port reference design that converts USB Type-C® input power to DC output or DC input to USB Type-C® output sourcing power.
The USB Type-C® port is...
Featured Documents:
100W USB Type-C® Input Power Converter
This is a USB-certified reference design to convert USB-C input power supplied by a USB Type-C® sourcing device to DC output.
Featured Documents:
Available on Lab on the Cloud
Use our PC-based GUI to instantly start configuring and testing designs in our virtual lab, no physical board needed.
100W USB Type-C® Battery System Reference
This is a single port reference design for implementing battery systems with 2 to 4 cells connected in series. This reference design supports a mode where power is only supplied from the USB Type-CⓇ port and a mode that enables a power bank in combination with a lithium-ion battery with BMS.
Featured Documents:
Surveillance Camera with CMOS Sensor Reference Design
The solution demonstrates a CMOS image sensor (CIS) board with phase-detection autofocus (PDAF) and a high-performance image signal processing (ISP) board along with...
Featured Documents:
Available on Lab on the Cloud
Use our PC-based GUI to instantly start configuring and testing designs in our virtual lab, no physical board needed.
USB PD with Turbo Boost Reference Design
This board supports USB Power Delivery (PD) Specification Rev. 3.0 and USB-Type C. The R9A02G011 USB PD controller performs authentication to accept USB Type-C.
Available on Lab on the Cloud
Use our PC-based GUI to instantly start configuring and testing designs in our virtual lab, no physical board needed.
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.
Processing table
| HVQFN | 3 | 2.13 | Get Samples, | ||
| 3 | 2.34 | Get Samples, |
Tips for Using This Parametric Table:
- Hide Filters button in header: Collapse or expands filters
- Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
- Reset button in header: Reset all filters to the page default
- Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
- Export button in header: Export the filtered results of the table to an Excel document
- Filter parts search bar in header: Type to filter table results by part number
- Hide column button in column headers: Select to hide columns in table
- AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
- Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
- Document icon next to product name in row: View the featured document for this product
- Chip icon next to the right of the document icon in row: View the block diagram for this product
- Cart icon to the right of the chip icon: Indicates that samples are available for this product
Videos & Training
USB Power Delivery (USB PD)
SI-05
Video List
Additional Details
Note:
This product uses SuperFlash(R) technology licensed from Silicon Storage Technology, inc. SuperFlash(R) is a registered trademark of Silicon Storage Technology, Inc. in several countries including the United States and Japan.