Overview

Description

Flexible output current capabilities are key to address modern multi core SoC solutions with a variety of different skews. The IDT P9148 distributed power units (DPU) operate as additional phases to the P9180A PMIC and P9145 PMIC to increase the output current of the solution. The device works as a controlled current source fully controlled by the host PMIC. Multiple P9148 devices may be used in parallel to provide additional current to the load. A high-speed proprietary interface between the P9180A,  P9145 and the P9148 provides control and feedback information. The device seamlessly integrates into the PMIC eco-system and is flexible and transparent to the user. P9148 has been designed for systems with single 5V supply available and supports additional features compared to P9147 (optional thermal limit warning flag, load current monitor and automatic load-balancing among phases).

Features

  • Single 4.5 V to 8.4 V  input voltage range
  • Output voltage controlled by host PMIC  (P9180AP9145)
  • Up to 6 A peak output current per device/phase
  • 2.0 MHz switching frequency, internal PWM generation
  • Support automatic phase-shedding, PFM and LDO modes
  • Simple 2 wire interface for device configuration, control and status exchange to the host PMIC
  • Automatic detection by Host PMIC
  • No analog feedback to PMIC required
  • Thermal limit warning flag and load current monitor capability optional
  • Automatic load-balancing and heat re-distribution among phases optional
  • Digital modulation and ML-based error correction
  • Industrial temperature range of -40°C to +85°C
  • 12-ld 3x4 mm DFN (NRG12)

Comparison

Applications

Documentation

Type Title Date
Datasheet Log in to Download PDF 764 KB
Product Change Notice PDF 771 KB
Application Note Log in to Download PDF 428 KB 简体中文
3 items

Design & Development

Boards & Kits

Boards & Kits

Models