Overview

Description

The 5P49V5908 is a programmable clock generator intended for high performance consumer, networking, industrial, computing, and data communications applications. Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using I2C interface. This is Renesas' fifth generation of programmable clock technology (VersaClock® 5). The frequencies are generated from a single reference clock or crystal.
 
Two select pins allow up to 4 different configurations to be programmed and accessible using processor GPIOs or bootstrapping. The different selections may be used for different operating modes (full function, partial function, partial power-down), regional standards (US, Japan, Europe) or system production margin testing. The device may be configured to use one of two I2C addresses to allow multiple devices to be used in a system. The device is packaged in a 48-pin 6mm x 6mm VFQFPN (NDG48), with an industrial operating temperature of -40 to +85°C.
 

Features

  • Generates up to four independent output frequencies with a total of 11 differential outputs and one reference LVCMOS output
  • Supports multiple differential output I/O standards:
    • Three universal outputs pairs with each configurable as one differential output pair (LVDS, LVPECL or regular HCSL) or two LVCMOS outputs. Frequency of each output pair can be individually programmed
    • Eight copies of Low Power HCSL (LP-HCSL) outputs
  • Meets PCIe® Gen1/2/3, USB 3.0, 1/10 GbE clock requirements
  • <0.7 ps RMS typical phase jitter on outputs
  • Four fractional output dividers (FODs)
  • Independent Spread Spectrum capability from each fractional output divider (FOD)
  • Stores 4 different configurations in OTP non-volatile memory
  • Input frequency ranges up to 200 MHz
  • Output frequency ranges up to 350 MHz
  • Programmable loop bandwidth and crystal load capacitance
  • 1.8 / 2.5 / 3.3V core and output voltages
  • Supported by Timing Commander™ software tool

Comparison

Applications

Documentation

Design & Development

Software & Tools

Software & Tools

Software title
Software type
Company
Timing Commander
Timing Commander™ is an innovative Windows™-based software platform enabling system design engineers to configure, program, and monitor sophisticated timing devices with an intuitive and flexible graphical user interface (GUI).
Code Generator Renesas
1 item

Software Downloads

Type Title Date
Software & Tools - Software Log in to Download ZIP 18.02 MB
Software & Tools - Other Log in to Download TCP 2.94 MB
2 items

Boards & Kits

Boards & Kits

Models

Programmable Clock Generator with PCIe Timing Outputs by IDT

This video provides an overview of IDT's programmable clock generators 5P49V5907 and 5P49V5908 featuring the fifth generation of programmable clock technology (VersaClock® 5). With additional outputs supporting PCI Express® timing, these devices present a blend of low power, flexibility, and high performance suitable for a wide range of applications including performance consumer, networking, industrial, computing, and data communications. For more information, visit the Programmable Clocks page.