|User Guides & Manuals|
|Product Lineup (IE850 for RH850) and Option Products||日本語||Manual||261 KB|
|E1/E20/E2 Emulator for the RH850 Family and the RH850 Pod for IE850||日本語||Manual||340 KB|
|[Notification] IE850 Full-spec Emulator System Capable of Large Trace Capacity for the RH850/D1x and RH850/E1x Series||日本語||Tool News - Featured Tool||324 KB|
|Target MCUs||RH850/E1M-S, RH850/E1L|
|Max. operating frequency||Same as target MCUs|
|Software break||Available (Number of points depends on the debugger.)|
|Hardware break||12 points
・8 dedicated for use with the execution of instructions at particular addresses
・4 shared between use with execution and access events Note: Ranges can be specified by 2 points.
|Event detection||8 points for post-execution events and 8 points for CPU access events
A sequential break with up to 4 stages can be created by combining the above types of event.
|4 points for DMA access events
A sequential break with up to 3 stages can be set up from DMA access events.
|4 points for GRAM access events
A sequential break with up to 3 stages can be set up from GRAM access events.
|32-bit counters for counting numbers of passes|
|Exception event detection||Not available|
|Realtime trace||Trace range: 512K frames
Trace data: Branch source/destination PC, access and time stamp
Conditional trace: Section in combination with event detection, qualify and delay
|Realtime RAM monitor||Available (DMA for debugging used)|
|Direct memory modification||Available (DMA for debugging used)|
|Performance measurement||Execution time from run to break|
|3 points for measurement of program execution times from run to break, and/or between pairs of event points
Items for measurement: Total execution time, number of passes, maximum execution time, and minimum execution time
|4 points for measuring numbers of instructions, interrupts, exceptions, clock cycles, instruction fetches, and hits on the instruction cache in program execution from run to break, and/or between pairs of event points
Items for measurement: Maximum values, minimum values, latest values, cumulative values, and number of passes
|32-bit counters for performance measurement|
|Realtime profile||Available (by using trace, depending on the debugger used)|
|External trigger input/Event output||Not available|
|User system connection||Connected to the connecter mounted on the foot pattern of the MCU via an adapter.|
|Emulation pod external dimensions (mm)||67(W) x 84(D)|
|Emulation pod weight||Approx. 60 g|
|Conformance with overseas standards||European Standards: EN 55022 Class A, EN 55024
US FCC Standard: FCC part 15 Class A
When designing a user system refer to the following descriptions in the users manual.
For other optional products than the emulation pod, refer to Product Lineup (IE850 for RH850) and Option Products (PDF | English, 日本語).