Overview

Description

The 8V44N4614 is a FemtoClock® NG Clock Generator. The device has been designed for frequency generation in high-performance systems such wireless base-band boards, for instance to drive the reference clock inputs of processors, PHY, switch and SerDes devices. The device is very flexible in frequency programming. It allows to generate the clock frequencies of 156.25MHz, 125MHz, 100MHz and 25MHz individually at three output banks. One output bank supports configurable LVDS, LVPECL, the other two output banks support LVCMOS output levels. All outputs are synchronized on the incident rising edge, regardless of the selected output frequency. Selective single-ended LVCMOS outputs can be configured to invert the output phase, effectively forming differential LVCMOS output pairs for noise reduction. The PLL reference signal is either a 25MHz, 50MHz, 100MHz or 200MHz differential or single-ended clock.
 
The device is optimized to deliver excellent period and cycle-to-cycle jitter performance, combined with good phase noise performance, and high power supply noise rejection.

The device is configured through an SPI serial interface. Outputs can be configured to any of the available output frequencies. Two hardware pins are available for selecting pre-set output enable/disable configurations. In each of these pre-set configurations, each output can be enabled/disabled individually. A separate test mode is available for an increase or decrease of the output frequencies in 19.53125ppm steps independent on the input frequency. The device is packaged in a lead-free (RoHS 6) 48-lead VFQFN package. The extended temperature range supports wireless infrastructure, telecommunication and networking end equipment requirements.

Features

  • Clock generator for wireless base-band systems
  • Drives reference clock inputs of processors, PHY, switch and
    SerDes devices
  • FemtoClock® NG technology
  • Three low-skew, differential LVDS, LVPECL configurable clock
    outputs
  • Ten low-skew, LVCMOS/LVTTL clock outputs
  • Input: 200MHz, 100MHz, 50MHz, 25MHz single-ended  
    (LVCMOS) or differential reference clock (LVDS, LVPECL)
  • Output clocks support 156.25MHz, 125MHz, 100MHz and 25MHz
  • Individual output disable (high-impedance)
  • Two sets of output enable configurations
  • PLL lock detect output
  • Test mode with frequency margining with 19.53125ppm steps
    (range ±507.8125ppm)
  • LVCMOS (1.8V, JESD8-7A) compatible SPI programming
    interface
  • Cycle-to-cycle jitter: 10ps (typical)
  • RMS period jitter: 1.6ps (typical)
  • Phase noise (12kHz - 20MHz): 0.40ps (typical)
  • 3.3V core and output supply
  • -40°C to +85°C ambient operating temperature
  • Lead-free (RoHS 6) 48-lead VFQFN packaging

Comparison

Applications

Documentation

Design & Development

Models